Jackson MSC AJ-44CE High-Temperature Single-Tank Conveyor Dishwasher

Industrial-grade, high-capacity single-tank rack conveyor dishwasher from Jackson MSC Inc. Proudly manufactured in the USA, the AJ-44CE series is engineered for high-volume commercial kitchens, large restaurants, hotels, hospitals, universities, and corporate cafeterias requiring massive hourly dish throughput with exceptional sanitation compliance.

🌟 Key Features

• High-Volume Cleaning Output: Processes up to approximately 225 racks per hour, maximizing dish room turnaround speed during peak service rushes.
• Efficient Conveyor Mechanics: Operates at a steady conveyor line speed of 6.9 Feet Per Minute (FPM), ensuring precise contact times for optimal cleaning and rinsing.
• Superior Chamber Clearance: Boasts an expanded 25” vertical chamber clearance, allowing the machine to easily accommodate oversized mixing bowls, sheet pans, and large tray configurations.
• EnergyGuard™ Control System: Intelligent electromechanical design activates the wash and rinse pumps only when a rack is physically passing through the zone, dramatically lowering water, chemical, and utility consumption.
• Heavy-Duty Construction: Built entirely out of heavy-gauge stainless steel for ultimate corrosion resistance, long-term durability, and easy sanitization.

Unit Details

• Brand: Jackson MSC Inc. (Jackson WWS)
• Model: AJ-44CE
• Serial Number: 01J8496M
• Equipment Type: High-Temperature Commercial Conveyor Dishmachine
• Standard Footprint Dimensions: 62” W × 25” D × 75.5” H (Width represents the machine frame footprint; table extensions vary)
• Water Consumption Efficiency: Uses approximately 0.68 gallons of water per rack (Estimated 153 Gallons Per Hour under continuous load).
• Origin: Made in the U.S.A. (Jackson, MS / Barbourville, KY)
• Compliance Certifications: NSF Component Certified (Standard 3), CSA Certified, UL Listed.

Operating Parameters

• Minimum Wash Tank Temperature: 160°F Min. (71°C)
• Minimum Final Rinse Temperature: 180°F Min. (82°C)
• Required Water Inlet Flow: 3.9 GPM
• Optimum Water Flow Pressure: 20 PSI

Electrical Specifications

• Voltage: 208 V
• Frequency: 60 Hz
• Phase: 3 Phase
• Wiring Configuration: 3 Wire
• Wash Motor: 2.0 HP (5.6 Amps)
• Conveyor Motor: 0.25 HP (1.1 Amps)
• Wash Tank Heater: 15 kW (41.7 Amps)
• Total Current Load: 48.4 Amps

Condition & Warranty

• Condition: Used (Fully cleaned, completely descaled, and cycle-tested by in-house technicians)
• Warranty: 90-day parts and labour warranty

Shipping & Delivery

Shipping available across Canada.